Jacuzzi J - 210 Manual Do Utilizador

8.  place Cover on spa

Kee

• 

ping the insulating cover in place anytime the spa is not in 

use will reduce the time required for heating, thereby minimizing 

operating costs.

The time required for initial heat-up will vary depending on the 

• 

starting water temperature.

Check water temperature carefully before entering hot tub! 
Excessive water temperature can cause burns, welts and 
body temperature to rise, hyperthermia (over-heating).

!

Decontamination procedure (steps 9-16)
Steps 9-16 below are only required when sanitizer levels are unstable 
after performing steps 1-6 above. Disregard steps 9-16 below if sanitizer 
levels remain stable at 3.0-4.0 ppm chlorine or 2.0-4.0 ppm bromine after 
performing steps 1-6.

9.  Add 2.5 ounces of sodium dichlor for every 100 gallons of water. 

Refer to the table below for approximate water fill volume by model.

CauTIon:  rIsk oF personal InJurY or spa DamaGe!
Never add chlorine tablets (trichlor) or acid to your hot tub for 
any reason! These chemical may damage components within 
your hot tub, burn or irritate your skin, create a rash, and void 
the manufacturer warranty for your spa.

!

J-280

539 US Gallons (2,041 Liters)

14.0 oz

J-270 

530 US Gallons (2,006 Liters)

13.0 oz

J-230

430 US Gallons (1,628 Liters)

11.0 oz

J-210

298 US Gallons (1,128 Liters)

8.0 oz