Nilfisk Alto 106269015 Manual Do Utilizador

NEPTUNE PE

General surfaces

Metallic equipment

Foam injectors Stand-
ard lance
Curved lances
Tank cleaning
head

Detergents
Intensive
J25 Multi
Combi Active
Alkafoam 

Disinfectant
DES 3000

1.  Apply thick foam over the surfaces to be cleaned. 

Apply on dry surfaces. Apply from top to bottom on 
vertical surfaces. Let the foam act for up to 30 min-
utes for the optimal effect.

2.  Proceed with cleaning using the high pressure 

lance.  Use applicable accessories. Use high pres-
sure to dislodge large amounts of incrusted dirt or 
grime. Use lower pressure and high water volume in 
order to rapidly fl ush away loose dirt and rinse sur-
faces.

3.  Apply DES 3000 disinfectant once the surfaces are 

perfectly clean.

Areas covered by amounts of loose dirt, such as ani-
mal remains in slaughterhouses, can be removed by 
using high water fl ow to fl ush away the dirt to evacua-
tion pits or drains.
Tank cleaning heads can be used to clean barrels, 
vats, mixing tanks etc. Cleaning heads may be hydrau-
lically or electrically powered and give the possibility for 
automatic cleaning without a constant user.

Rusted or dam-
ages surfaces prior 
to treatment

Wet Sandblasting 
equipment

1.  Connect the sandblasting lance to the pressure 

washer and place the suction tube in the sand.

2.  Always wear protective equipment during sandblast-

ing.

3.  Spray the surfaces to be treated with the mix of wa-

ter and sand. Rust, paint etc will be stripped off.

These are merely several examples of cleaning tasks that can be solved by a pressure washer in asso-
ciation with accessories and detergents. Each cleaning task is different. Please consult your local dealer 
or Nilfi sk-ALTO representative in order to discuss the best solution for your own cleaning tasks.