Nilfisk Alto 106269015 Manual Do Utilizador

NEPTUNE PE

1.  Close water tap
2.  Activate spray handle without 

lance in order to empty all 
residual water in the system.

3.  Turn the ON/OFF switch to 

position “OFF”.

4.  Turn off the engine.
5.  Activate spray handle until 

the washer is depressurised.

6.  Lock the safety catch on the 

spray handle.

It is advisable to store the ma-
chine in a frost proof place be-
tween operations. If this is not 
possible the machine should be 
protected in the following way:

1.  Disconnect the water inlet 

hose. Remove the lance and 
empty it of water.

2.  Start the machine allowing it 

to run with the spray handle 
opened until it is empty of 
water.

3.  Place a suction hose in a 

bucket with 6-8 l (1.5-2 gal-
lons) anti-freeze.

4.  Place the spray handle (with-

out spray lance) above the 
bucket, activate the spray 
handle so that the anti-freeze 
can circulate.

5.  Place the psray handle above 

the opening of the anti-freeze 
container and allow the ma-
chine to pump all of the solu-
tion back into the anti-freeze 
container. The anti-freeze can 
be re-used, but keep in mind 
that it is slightly diluted with 
water each time this is done.

Important:
To avoid damage always ensure 
that the washer, the hoses and 
the spray lance are unfrozen 
before restarting. Place the 
washer and the accessories in 
a warm environment for some 
time before starting up.