Casablanca Fan Company K4BR Folheto
89443470
Jul. 03
For fan models ending in A, D, M, R,
T, V, W: (For K4BR — See Step 10
First!!)
1.
T, V, W: (For K4BR — See Step 10
First!!)
1.
Remove the cover from fan by removing two brass
8-32 screws and save these screws for attaching light
fixture. Remove plastic wire nuts from switch housing
wires and strip 1/2" insulation from both wires (black or
blue, and white). This cover will not be reused. See
FIG. 1
NOTE: If installing this light fixture on a 3 Speed
pull-chain model fan, a separate pull-chain switch
(included with the fan) must be installed. Refer to
the following installation instructions, otherwise
skip to step 4.
fixture. Remove plastic wire nuts from switch housing
wires and strip 1/2" insulation from both wires (black or
blue, and white). This cover will not be reused. See
FIG. 1
NOTE: If installing this light fixture on a 3 Speed
pull-chain model fan, a separate pull-chain switch
(included with the fan) must be installed. Refer to
the following installation instructions, otherwise
skip to step 4.
2
2
2
2
2.
Remove the plastic plug from the fan switch hous-
ing. Install the light on-off switch by inserting the chain
through hole, from the inside. Pass the switch threads
into the hole and screw the knurl nut onto the switch.
Hand tighten firmly. See FIG. 2
through hole, from the inside. Pass the switch threads
into the hole and screw the knurl nut onto the switch.
Hand tighten firmly. See FIG. 2
3
3
3
3
3.
Attach the blue wire from the fan to one of the blue
wires on the switch by twisting the bare ends of the
wires together. Secure the splice by threading on one
of the wire nuts provided. Test the secureness of the
splice by pulling on the wire nut.
wires together. Secure the splice by threading on one
of the wire nuts provided. Test the secureness of the
splice by pulling on the wire nut.
FIG. 1
WARNING: To reduce the possibility of electrical shock be sure that the power
is turned off at its source(fuse or circuit breaker). All electrical components
must be installed in accordance with national and local electrical codes.
To reduce the risk of fire and electrical shock, this light fixture should be used
only with UL, ETL & CUL Certified Casablanca ceiling fans.
is turned off at its source(fuse or circuit breaker). All electrical components
must be installed in accordance with national and local electrical codes.
To reduce the risk of fire and electrical shock, this light fixture should be used
only with UL, ETL & CUL Certified Casablanca ceiling fans.
R
FAN COMPANY
READ AND SAVE THESE INSTRUCTIONS
INSTRUCTIONS FOR MOUNTING INTEGRATED LIGHT FIXTURE
K4, K4B, K4BR, K4S, KG4T
Fixture
Light Bulb(s)
Dimensions (w/glass)
Weight
K4
4-60W A15 Med. Base
7” h x 20” w
2 lbs
K4B
4 - 50w “R” Reflector
6
1/
4
” h x 10 to 19” w
3 lbs
K4BR
4 - 50w “R” Reflector
7” h x 11 to 19” w
2 lbs
K4S
4 - 60w A15 Med. Base
6” h x 20
1/
2
” w
2 lbs
KG4T
4 - 60w A15 Med. Base
5
1/
2
” h x 17
1
/
2
”w
4 lbs
IMPORTANT: Before discarding any packing material locate the following items:
SWITCH
HOUSING
HOUSING
COVER
8-32 SCREW
PULL-CHAIN
SWITCH
SWITCH
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
FIG. 2
WIRE NUT
PLASTIC PLUG
BLUE WIRE
KNURL NUT
WHITE WIRE