Casablanca Fan Company C16G73T Manual Do Utilizador

The POWER button is normally left in the on position. Always turn the power 
off during cleaning or servicing the fan and during thunderstorms. It is also 
used to exit or enter additional programs. 

There are four individual speed settings for the fan; each speed is indicated by 
an audible tone of increasing pitch. 

To select the desired fan speed:

1.  With fan off, press and hold the button labeled FAN. The fan blades will 

start rotating at the slowest speed, and will increase in steps

2.  Release the button when the desired speed is reached. 

The fan speed is now in memory and will automatically come on at the same 
speed each time the FAN button is used. To maintain this level of speed, turn the 
fan on by pressing FAN less than one second. To lower speed, turn fan off, the 
non by pressing and holding the FAN button until the desired speed is reached. 
When the fan is on, you may increase the speed by pressing and holding the 
FAN button until the desired speed is reached, then release it. 

The direction of airf low can be changed from 
downward to upward or from upward to downward. 

To reverse the airfl ow: 

1.  Make sure the FAN is on. 

2. Press the REVERSE button. 

NOTE: A four-toned signal indicates the command 
was accepted by the fan. A few seconds later the fan 
will slow to a stop and then reverse direction. 

To turn the lights off and on, press and release the LIGHT  button for less 
than one second.