Casablanca Fan Company C16G73T Manual Do Utilizador

•  The blades in each pack are matched for equal weight to 

assure smooth fan operation. If more than one fan is being 
installed, do not mix blades from different cartons. 

•  Inspect the contents of your carton for possible shipping 

or handling damage. If parts are missing or damaged, 
call 1-888-227-2178.

•  You will need a total of three people to install this fan. 

(Approximate weight is 150 lbs.)

•  When cleaning, painting, or working near your fan, be 

cautious of the fan and blades. Always turn power to the 
ceiling fan OFF before replacing lightbulbs or working 
on your fan. 

•  Never insert anything into the path of the fan blades while 

the fan is in operation. 

•  Never install a fan over a pool or spa. 

•  Never operate a fan that has been damaged in any way. 

For assistance in obtaining service, contact Casablanca 
Fan Company toll-free at 1-888-227-2178, or contact your 
local Authorized Casablanca Dealer.

•  CAUTION: RISK OF ELECTRICAL SHOCK! Installation is to be in accordance with the National Electrical ANSI/NFPA 70-

1999 and local codes. If you are unfamiliar with the wiring codes, you should use a qualifi ed electrician. To avoid overheating 
and possible damage to other equipment, do not install control to a receptacle, fl uorescent light fi xture, operating appliance, 
or transformer-supplied appliance. 

•  This fan should be installed over an UL Listed electrical outlet box, and be mounted directly to a structural support. If the 

electrical outlet box does not meet these guidelines, a new box must be installed.

•  Casablanca extension poles may be available for this model. Accessory downrods are available in lengths from 12 inches to 

117 inches. Ask your authorized Casablanca dealer for details.

•  This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum of 15-amp circuit. The maximum 

current required for the fan with light fi xture is 2.77 amps. The fan uses about 0.9 amps (108 watts). Maximum light current 
is about 1.87 amps (224 watts) of lighting.

•  Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy, make sure all 

wires are within the canopy and that no wires are being pinched. 

•  WARNING: Do not insert foreign objects in between the rotating fan blades. 

•  WARNING: To reduce the risks of fi re or electric shock, do not use this fan with any solid-state control device. Use only the 

control provided with or recommended for this fan. 

•  WARNING: Do not remove stickers from the Candelier fi xture. Each numbered sticker corresponds to a candle size and 

shape, and will be necessary to properly install the candles.

Prior to assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts 
listed in the Parts Guide. Do not remove lightbulbs from their packaging until you are ready to install them. Before discarding 
packaging materials, be certain that all parts have been removed. If loose Styrofoam is stuck to the Candelier fi xture, use a clean, 
dry paintbrush to remove small Styrofoam pieces. Do not brush Styrofoam into wiring cavities. 

from bottom 

edge of blade 

to fl oor

24" ↑

84" ↑

48"↑

" ↑

Dimensions indicated are the minimum 
allowable for proper installation.