Casablanca Fan Company 99088 Manual Do Utilizador

MA004-01 • 07/24/13

1.888.830.1326

Using the single pin connectors, connect 

the black or blue wire from the fan to the 

black wire from the light kit. Connect the 

white wire from the fan to the white wire 

from the light kit. 

If your fan does not have pin connectors 

on the wires coming from the switch 

housing, install the wiring harness 

provided. Using the provided wire 

connectors connect the white wire from 

the fan to the white wire from the wire 

harness and connect the black or blue 

wire from the fan to the black wire from 

the wire harness.

Feed the wires through the center hole in 

the switch housing, the washer, and the nut. 

Push the center hole in the gasket over the 

threaded rod of the light kit. Then install the 

switch housing by twisting clockwise onto 

the threaded rod. Install the washer and nut 

onto threaded rod and tighten securely.

Lift the light kit assembly up so that the 

screw holes in the lower switch housing 

line up with the holes in the upper switch 

housing. Install the switch housing 

screws and tighten securely.

Switch 

Housing 

Screw

Wire    

Connector

Switch 

Housing

Do not allow the light kit to hang 
only by the wire connections!