Casablanca Fan Company 99088 Manual Do Utilizador

MA004-01 • 07/24/13

1.888.830.1326

Lift the light kit assembly up so that the 

screw holes in the lower switch housing 

line up with the holes in the upper switch 

housing. Install the switch housing 

screws and tighten securely.

Upper 

Switch 

Housing

Using the single pin connectors, connect 
the black or blue wire from the fan to the 
black wire from the light kit. Connect the 
white wire from the fan to the white wire 

from the light kit. 

Feed the wires through the switch 

housing cap, washer, and nut. Then 

install the switch housing cap by twisting 

clockwise onto the threaded rod, making 

sure the gasket stays in line with the top 

of the light kit. Install the washer and nut 

onto threaded rod and tighten securely.

Threaded 

Rod

Washer 

and Nut

If your fan does not have pin connectors 

on the wires coming from the switch 

housing, install the wiring harness 
provided. Using the provided wire 

connectors connect the white wire from 

the fan to the white wire from the wire 

harness and connect the black or blue 

wire from the fan to the black wire from 

the wire harness.

Wire    

Connector

Switch 

Housing

Do not allow the light kit to hang 
only by the wire connections!