Yamaha PF-500 Manual Do Utilizador

If you assign the SONG START/STOP function to a 
pedal and turn the function On, the pedal function 
assigned to the pedal in the Voice Setting menu (pages 
75 and 76) is disabled.

See the procedure on page 63.

Left, Middle, AUX

On/Off

Off for all pedals

A pedal connected to the [AUX PEDAL] connector 
may switch on and off differently. For example, 
some pedals turn on the effects and others turn 
them off when you press them. 
Use this parameter to reverse this mechanism.
See the procedure on page 63.

Make, Break

Here you can specify the point to which you must 
depress the pedal (right, center, left, AUX) before the 
assigned effect begins to be applied. (This setting 
applies to effects that can be assigned to each pedal, 
such as damper or sostenuto (

not affected by this setting.)

If the effect is an on/off type effect, this setting 
specifies the point at which the effect will be 
switched on/off.

–2 (effective with the shallowest press) - 0 - +2 
(effective with the deepest press)

This specifies the amount of change that can be 
produced by the pitch bend function which 
smoothly varies the pitch.
• This setting applies only to the manually-played 

sound.

• This setting can be made in semitone steps.
• You can set the pedal function (page 75) to spec-

ify whether the pitch will be raised or lowered.

See the procedure on page 63.

0–+12 (Pressing the pedal will raise/lower the pitch 
by 12 semitones [1 octave])

–2

C

A

D

B

Select a pedal to assign 
the function.

Set to On or Off.

NO

YES

C

A

D

B

NO

YES

C

A

D

B

NO

YES

C

A

D

B

NO

YES