Yamaha S90 ES Manual Do Utilizador

About the editing functions

In this section, we’ll explain the basic operations for editing the Voice, Performance, Multi settings.

You can adjust or set various parameters by using the data dial, [INC/YES] button, [DEC/NO] button, and Control sliders in 
each mode. 
When changing the value of the parameter in the Voice, Performance, and Multi modes, the [E] (Edit Indicator) will appear 
on the top left corner of the LCD display. This indicates that the current program (Voice, Performance, or Multi) has been 
modified but not yet stored. If you wish to store your sound obtained by edit operation, be sure to store the current program 
to internal memory in the Store mode before selecting another program (pages 50, 56, 76).

Use these four buttons to navigate the display, moving 
the cursor around the various selectable items and 
parameters in the screen. When selected, the relevant 
item is highlighted (the cursor appears as a dark block 
with inverse characters). You can change the value of 
the item (parameter) at which the cursor is located by 
using the data dial, [INC/YES] and [DEC/NO] buttons.

Rotating the data dial to the right (clockwise) increases 
the value, while rotating it to the left (counter-clockwise) 
decreases it.
For parameters with large value ranges, you can 
increase the value by 10 by simultaneously holding 
down the [INC/YES] button and pressing the [DEC/NO] 
button. To decrease by 10, do the opposite; 
simultaneously hold down the [DEC/NO] button and 
press the [INC/YES] button.

Edit Indicator

If the Edit Indicator 
appears...