Yamaha S90 ES Manual Do Utilizador
Basic Operation
Information Display
27
Owner’s Manual
Information Display
This convenient function lets you call up relevant details about the selected mode—simply by pressing the [INFORMATION]
button. For example, when the Voice mode is active, you can quickly check information about which voice bank is selected,
what Play mode (poly or mono) is being used, which effects are applied, and so on.
button. For example, when the Voice mode is active, you can quickly check information about which voice bank is selected,
what Play mode (poly or mono) is being used, which effects are applied, and so on.
Note (Key) settings
Several parameters let you set a key range for a function—for example, in setting up a keyboard split—by specifying certain
note values. You can use the [INC/YES] and [DEC/NO] buttons or data dial to set these parameters, or you can directly enter
the values from the keyboard by pressing the appropriate keys (as shown below).
note values. You can use the [INC/YES] and [DEC/NO] buttons or data dial to set these parameters, or you can directly enter
the values from the keyboard by pressing the appropriate keys (as shown below).
n About the note name assigned to each key, see page 16.
Naming
You can freely name data you’ve created, such as voices and files saved to the USB storage device. The chart below lists
the types of data that can be named along with the operations for calling up the respective naming displays.
the types of data that can be named along with the operations for calling up the respective naming displays.
First, call up the name input display according to the above table, then, move the cursor by using the Cursor button to the
desired location and input a character. See below for details.
desired location and input a character. See below for details.
n Since the name of the program is part of the data, make sure that you properly save the program after naming it.
Data types that can be named
How to call up the naming display
Page
Voice
[VOICE]
→
[EDIT]
→
[F1] GENERAL
→
[SF1] NAME
[MULTI/SEQ PLAY]
→
[F3] VOICE
→
Normal Voice Selection
→
[F5] VCE ED
Performance
[PERFORM]
→
[EDIT]
→
[F1] GENERAL
→
[SF1] NAME
Multi
[MULTI/SEQ PLAY]
→
[EDIT]
→
[F1] GENERAL
→
[SF1] NAME
Master
[MASTER]
→
[EDIT]
→
[F1] NAME
Volume Label of the USB storage device
[FILE]
→
[F1] CONFIG
→
[SF3] FORMAT
File/Folder saved to the USB storage device
[FILE]
→
[F2] SAVE or [F4] RENAME
INFORMATION
INFORMATION
When Note Limit is selected, the [KBD] mark appears,
indicating that you can use the keyboard to set the
value. Simultaneously hold down the [INFORMATION]
button and press the appropriate key.
indicating that you can use the keyboard to set the
value. Simultaneously hold down the [INFORMATION]
button and press the appropriate key.