Yamaha CLP-F01 Manual Do Utilizador

CLP-F01

   Connections

Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before turn-
ing the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to 
the components may result.

1

AUX OUT [R] [L] Pin jacks (LEVEL FIXED), [R] [L/L+R] Phone jacks

You can connect these jacks to a stereo system to amplify the Clavinova or to a cas-
sette tape recorder to record your performance. Refer to the diagram below and use 
audio cables to make the connections.

Do not route the output from the AUX OUT jacks to the AUX IN jacks. That is, when 
you connect an external audio device to the AUX OUT jacks, do not connect the audio 
device to the Clavinova’s AUX IN jacks. If you make this connection, the signal input at 
the AUX IN jacks will be output from AUX OUT. This creates an audio loop, causing 
audio oscillation and abnormal playback, and leading to malfunction of both pieces of 
equipment.

When the Clavinova’s AUX OUT jacks are connected to an external audio system, first 
turn on the power to the Clavinova, then to the external audio system. Reverse this 
order when you turn the power off.

1

2

3

4

5

Use audio cables and adaptor 
plugs with no resistance.

The Clavinova’s [MASTER 
VOLUME] and [BRILLIANCE] 
control setting does not affect 
the signal output from the AUX 
OUT (LEVEL FIXED) jacks.

Clavinova

Stereo

RCA 

pin plug

To powered speakers

RCA 
pin plug

AUX IN

When these are connected (with stan-
dard phone plugs), you can use the 
[MASTER VOLUME] control to adjust 
the volume of the sound output to the 
external device.

When these are connected (with RCA pin 
plug; LEVEL FIXED), the sound is output to 
the external device at a fixed level, regardless 
of the [MASTER VOLUME] control setting.

phone 
plug
(standard)

audio cable