Yamaha CLP-F01 Manual Do Utilizador

CLP-F01

The Clavinova does not turn on.

The Clavinova has not been plugged in properly. Securely insert the female plug into 
the socket on the Clavinova, and the male plug into a proper AC outlet (page 12).

A click or pop is heard when the power is 
turned on or off.

This is normal when electrical current is being applied to the instrument.

Noise is heard from the speakers or head-
phones.

The noise may be due to interference caused by the use of a mobile phone in close 
proximity to the Clavinova. Turn off the mobile phone, or use it further away from the 
Clavinova.

The overall volume is low, or no sound is 
heard.

• The Master Volume is set too low; set it to an appropriate level using the [MASTER 

VOLUME] control.

• Make sure a pair of headphones is not connected to the headphones jack (when the 

SPEAKER switch is set to the “NORMAL” position). If the SPEAKER switch is set to 
the “OFF” position, set it to “NORMAL” or “ON” (page 13).

• Make sure that Local Control (page 48) is ON.

The speakers do not switch off when a pair of 
headphones is connected.

The SPEAKER switch may be switched “ON.” Set the SPEAKER switch to the “NOR-
MAL” position (page 13).

 If 

 appears on the display, an internal malfunction has occurred. In this case, contact your Yamaha dealer.

CLP-F01