Yamaha 01V Manual Do Utilizador
Troubleshooting
255
01V—Owner’s Manual
Added channels to a mute group
but group muting does not work.
but group muting does not work.
Cannot store an EQ program.
EQ settings cannot be stored to preset programs 1 through 40. Try
storing to user programs 41 through 80. See “Storing EQ Programs”
on page 68 for more information. EQ settings of channel 17 through
24 can not be stored.
storing to user programs 41 through 80. See “Storing EQ Programs”
on page 68 for more information. EQ settings of channel 17 through
24 can not be stored.
Cannot recall EQ programs to input
channels 17 through 24.
channels 17 through 24.
EQ programs cannot be recalled to input channels 17 through 24.
Cannot locate the aux send
panpots.
panpots.
The bus master level faders work in
unison.
unison.
No output from the OMNI OUTs.
Check the OMNI OUT source assignments. See “Assigning Omni
Outs” on page 116 for more information.
Outs” on page 116 for more information.
Cannot send channel signals to the
effects processors.
effects processors.
If the effects sends are configured post-fader, the regular channel
fader must be raised in addition to the aux send fader. See “Using the
Effects” on page 123 for more information.
fader must be raised in addition to the aux send fader. See “Using the
Effects” on page 123 for more information.
The effects send meters indicate
that signals are being sent to the
effects, but the processed sounds
cannot be heard.
that signals are being sent to the
effects, but the processed sounds
cannot be heard.
Cannot store effects programs.
Effects settings cannot be stored to preset programs 1 through 42. Try
storing to user programs 43 through 99. See “Storing Effects Pro-
grams” on page 133 for more information.
storing to user programs 43 through 99. See “Storing Effects Pro-
grams” on page 133 for more information.
Cannot recall effects programs 19
and 42 to Effect 1.
and 42 to Effect 1.
These effects programs use the HQ. PITCH and FREEZE type effects
and can only be recalled to Effect 2. See “Preset Effects Programs” on
page 121 for more information.
and can only be recalled to Effect 2. See “Preset Effects Programs” on
page 121 for more information.
Cannot feed effects return 1 to
Effect 1, or effects return 2 to Effect
2.
Effect 1, or effects return 2 to Effect
2.
Cannot store dynamics programs.
Dynamics settings cannot be stored to preset programs 1 through 40.
Try storing to user programs 41 through 80. See “Storing Dynamics
Programs” on page 174 for more information.
Try storing to user programs 41 through 80. See “Storing Dynamics
Programs” on page 174 for more information.
Cannot store to scene memory 00.
Scene memory 00 is a read-only memory. See “Scene Memory 00” on
page 185 for more information.
page 185 for more information.
Cannot store mix scenes.
Is the selected scene memory protected? See “Protecting Scene Mem-
ories” on page 189 for more information.
ories” on page 189 for more information.
Cannot recall mix scenes.
Only scene memories that contain data can be recalled.
Help! I recalled a mix scene by
mistake.
mistake.
The scene memory number keeps
flashing.
flashing.
This is because a scene memory other than the one last recalled has
been selected but not recalled. See “Scene Memory Display Area” on
page 185 for more information.
been selected but not recalled. See “Scene Memory Display Area” on
page 185 for more information.
Recalling a mix scene doesn’t
update some channels.
update some channels.
The specified fade time has no
effect.
effect.
Fade Time settings must be stored in mix scenes before they take
effect. See “Setting a Fade Time” on page 191 for more information.
effect. See “Setting a Fade Time” on page 191 for more information.
Symptom
Advice