Yamaha 02R Manual Do Utilizador

MIXING Display Functions

The VIEW display function allows you to see all the parameters of an 
individual channel at a glance and adjust any parameter that you feel 
requires a change. You can view the input channels (MIC/LINE 1 through 
16, LINE 17/18 through 23/24) and the tape and effect return channels 
(TAPE 1 through 16, EFF1 and EFF2).

Shown below is the VIEW display function:

Unlike the previous display functions in this section, the VIEW display 
function shows the currently selected channel only.

Each time you press the [ENTER] button, the phase will alternate between 
NOR (normal) and REV (inverted). Rotate the encoder wheel to adjust the 
attenuation.

These controls duplicate the phase/attenuation function. See “Phase and 
Attenuation” on page 32 of the User’s Guide.

Rotate the encoder wheel to set the pan position. You may find the PAN 
controls in the SELECTED CHANNEL group more convenient for setting 
the pan position.

When you press the [ENTER] button, the channel will be linked with its 
adjacent channel in GANG mode. Dotted lines will indicate the connection 
to the corresponding channel. Press the [ENTER] button again to switch 
back to INDIVIDUAL mode.

See “Pan and Balance” on page 36 and “Stereo-Pair Pans” on page 37 of the 
User’s Guide.