Roland AT-350C Manual Do Utilizador
104
Formatting a USB Memory (Format Media)
The process of preparing USB memory so that they can be used with
the ATELIER is called “initialization” (formatting).
If the media format does not match the ATELIER’s, you will not be able
If the media format does not match the ATELIER’s, you will not be able
to use that media with the ATELIER.
1. Connect the USB memory to the USB Memory connector.
2. Press the [Utility] button.
3. Press the Menu [
2. Press the [Utility] button.
3. Press the Menu [
] [
] buttons to select “Media Utility.”
4. Press the [Utility] button.
5. Press the Menu [
5. Press the Menu [
] [
] buttons to select “Format Media.”
6. Press the [Utility] button.
The Format screen appears.
To cancel the procedure, press the [Reset] button.
7. Press the [Rec] button to start formatting.
To return to the basic screen, press the [Display/Exit] button a number
of times.
* Never attempt to remove the USB memory until formatting is
complete.
Changing the USB Memory Setting
(USB Memory Mode)
In some cases, when USB memory is connected to the USB Memory
connector, it might take a long time for data to be read, or the ATELIER
might fail to read the data. If this occurs, switching the USB memory
setting may solve the problem.
Value
MODE 1, MODE 2