Roland AT-350C Manual Do Utilizador

105

Selecting the MIDI Transmit Channel 

(Tx MIDI Channel)

When you use the MIDI connectors of the ATELIER to transmit musical 

data to external devices, for each keyboard (Upper, Lower, and Pedal) 

you can specify the channel on which your playing will be transmitted 

as MIDI messages. You can modify these Tx (Transmit) MIDI settings as 

needed.

1–16

•  For details refer to “Connecting MIDI Devices” (p. 113).
•  The Control part transmits expression pedal data and PC numbers.

MIDI IN Mode (MIDI IN Mode)

The ATELIER contains two sound generators: one for SMF data 

playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control only 

the sound generator for SMF data playback. However by changing 

the MIDI IN Mode setting, you can also control the keyboard sound 

generator from MIDI In.

Control the instrument as a GS sound generator.

Channels 5 through 10 and Channels 12, 14, 

15 are transmitted to the GS sound generator, 

and all other channels are transmitted to the 

keyboard sound generator.

GS

Solo

GS

Pedal/GS *

GS

Lower

GS

Upper

GS

GS

GS

Drums/SFX

GS

GS

GS

Manual Percussion

GS

GS

GS

Control

* :  When the pedal part button is ON, data received at the MIDI In 

connector will control the pedal part of keyboard sound generator. 

When the pedal part button is OFF, data received at the MIDI In 

connector will control the GS sound generator.

Specifying Transmission of PC Numbers 

(Send PC Switch)

Transmission of PC (Program Change) numbers can be switched ON/

OFF.

PC numbers are transmitted.

PC numbers are not transmitted.

Setting PC Numbers (PC Number)

You can specify the Program Change number that will be transmitted 

from MIDI Out when a Registration is selected.

0–127

0–127

1–128