Yamaha YDP-223 Manual Do Utilizador

YDP-223

   Recording Your Performance

When Record mode is engaged in the previous step, the last-recorded track will 
automatically be selected for recording and its indicator — i.e. the 

 or 

 button indicator — will glow red. If you want to record on a different 

track, press the appropriate track button so that its indicator glows red.

Recording will begin automatically as soon as you play a note on the keyboard 
or press the 

 button. The current measure number will 

appear on the display while recording.

Press either the 

 or 

 button to stop recording.

The indicator of the recorded track will glow green to indicate that it now con-
tains data. (Record mode is disengaged automatically.)

Press the

 button to play back the recorded performance.

To stop playback in the middle of a song, press the

but-

ton.

This section explains how to record again in case your performance was not satisfactory.

 

Repeat Step 1 on page 28 if you wish to change the previous settings.

Press the 

 button, again. 

The selected track’s indicator flashes in red.

If the metronome was on when 
you started recording, you’ll be 
able to keep time with the met-
ronome while recording, but the 
metronome sound will not be 
recorded.

For more recording information, 
see page 30.

The left pedal can be assigned 
to start and stop recording via 
the “Left Pedal Mode” function 
described on page 40.

The record track indicator will 
begin to flash when the recorder 
memory is almost full. If the 
memory becomes full during 
recording, “FUL” will appear on 
the display and recording will 
stop automatically. (All recorded 
data up to that point will be 
retained.)

Pressing the SONG [START/
STOP] button to start recording, 
then pressing it again to stop 
recording will erase all previ-
ously-recorded data on the 
selected track.

If you want to change the 
tempo, time signature, reverb 
type, or effect type when re-
recording a track or when 
recording to another track, do 
so after you engage Record 
Ready mode (step 2).

You cannot re-record in the mid-
dle of a song.