Yamaha YDP-223 Manual Do Utilizador

YDP-223

   Troubleshooting

BC-100 Bench

A comfortable bench styled to match your Yamaha YDP-223.

HPE-160 Stereo Headphones

High-performance lightweight dynamic headphones with extra-soft ear pads.

The YDP-223 does not turn on.

The YDP-223 has not been plugged in properly. Securely insert the female plug into 
the socket on the YDP-223, and the male plug into a proper AC outlet (page 11).

A click or pop is heard when the power is 
turned on or off.

This is normal when electrical current is being applied to the instrument.

Noise is heard from the speakers or head-
phones.

The noise may be due to interference caused by the use of a mobile phone in close 
proximity to the YDP-223. Turn off the mobile phone, or use it further away from the 
YDP-223.

The overall volume is low, or no sound is 
heard.

• The Master Volume is set too low; set it to an appropriate level using the [MASTER 

VOLUME] control.

• Make sure a pair of headphones is not connected to the headphones jack (when the 

SPEAKER switch is set to the “NORMAL” position). If the SPEAKER switch is set to 
the “OFF” position, set it to “NORMAL” or “ON” (page 12).

• Make sure that Local Control (page 41) is ON.

The speakers do not switch off when a pair of 
headphones is connected.

The SPEAKER switch may be switched “ON.” Set the SPEAKER switch to the “NOR-
MAL” position (page 12).

The damper pedal has no effect, or the sound 
continuously sustains even when the damper 
pedal is not pressed.

The pedal cable/plug may not be properly connected. Make sure to securely insert the 
pedal plug into the proper jack (pages 53–55).

 If 

 appears on the display, an internal malfunction has occurred. In this case, contact your Yamaha dealer.