Yamaha H11 Manual Do Utilizador

H11 Owner’s Manual

ENGLISH

Precautions when using the USB [TO DEVICE] terminal

This instrument features a built-in 

USB 

 terminal. When connecting a USB device to the terminal, be sure to 

handle the USB device with care. Follow the important precautions below.

■ Compatible USB devices

• USB storage devices (flash memory, floppy disk drive, 

hard disk drive, etc.)

• USB hub

The instrument does not necessarily support all commer-
cially available USB devices. Yamaha cannot guarantee oper-
ation of USB devices that you purchase. Before purchasing a 
USB device for use with this instrument, please visit the fol-
lowing web page: 
http://music.yamaha.com/download/

■ Connecting USB device

• When connecting a USB device to the 

USB [TO 

DEVICE] terminal, make sure that the connector on the 
device is appropriate and that it is connected in the 
proper direction.

• If you intend to connect two or three devices at the same 

time to a terminal, you should use a USB hub device. The 
USB hub must be self-powered (with its own power 
source) and the power must be on. Only one USB hub 
can be used. If an error message appears while using the 
USB hub, disconnect the hub from the instrument, then 
turn on the power of the instrument and re-connect the 
USB hub.

• Though the instrument supports the USB 1.1 standard, 

you can connect and use a USB 2.0 storage device with 
the instrument. However, note that the transfer speed is 
that of USB 1.1.

■ Using USB Storage Devices

• By connecting the instrument to a USB storage device, 

you can read data from the connected device.

■ The number of USB storage device to be 

Up to one USB storage devices can be connected to the 

USB 

[TO DEVICE] terminal. 

■ Formatting USB storage media

When a USB storage device is connected or media is 
inserted, a message may appear prompting you to format 
the device/media. If so, execute the Format operation (page 
24).

The format operation overwrites any previously existing 
data. Make sure that the media you are formatting does 
not contain important data. Proceed with caution, espe-
cially when connecting multiple USB storage media.

■ To protect your data (write-protect)

To prevent important data from being inadvertently erased, 
apply the write-protect provided with each storage device or 
media. If you are saving data to the USB storage device, 
make sure to disable write-protect.

■ Connecting/removing USB storage 

Before removing the media from the device, make sure that 
the instrument is not accessing data (such as in the Save 
operations).

Avoid frequently turning the power on/off to the USB 
storage device, or connecting/disconnecting the device 
too often. Doing so may result in the operation of the 
instrument “freezing” or hanging up. While the instru-
ment is accessing data (such as during Save operations), 
do NOT unplug the USB connector, do NOT remove the 
media from the device, and do NOT turn the power off 
to either device. Doing so may corrupt the data on either 
or both devices.

For more information about the handling of USB devices, refer to the owner’s manual of the USB device.

Other USB devices such as a com-
puter keyboard or mouse cannot be 
used.

Although CD-R/RW drives can be 
used to read data to the instrument, 
they cannot be used for saving data.