Alesis DG8 Manual Do Utilizador
Chapter 2: Playing the DG8
46
DG8 R
EFERENCE
M
ANUAL
MIDI F
UNCTIONS
Pressing the
MIDI
button puts the DG8 into MIDI Edit mode.
Pressing the
MIDI
button repeatedly will step through the six different pages of the
DG8’s MIDI functions.
Press the
PLAY
button to exit any of the pages in this mode.
Page 1: Basic MIDI Channel
This is the MIDI Channel for Primary Sounds and Layers. The MIDI Channel
assignments for Layer Program Changes and Split channels follow sequentially:
Layer Program Changes = Basic Channel + 1, Splits = Basic Channel + 2.
This is the MIDI Channel for Primary Sounds and Layers. The MIDI Channel
assignments for Layer Program Changes and Split channels follow sequentially:
Layer Program Changes = Basic Channel + 1, Splits = Basic Channel + 2.
The DG8 operates in MIDI “Mode 3: Omni Off/Poly” only, and defaults to MIDI
Channel 1. To set the DG8 to transmit and receive on another MIDI Channel:
Channel 1. To set the DG8 to transmit and receive on another MIDI Channel:
1. Press the
MIDI
button. The last MIDI function display that was accessed will be
shown. Press the MIDI button repeatedly until the display reads:
BASIC
MIDI Channel = X
... where
X is one of the 16 MIDI Channels or
Off
. When set to
Off
, the DG8
will neither transmit nor receive MIDI information.
2. Use the
▲
and
▼
arrows to select the new Basic MIDI Channel or
Off
.
3. To confirm your selection and exit this mode, press
PLAY
.
The DG8 transmits and receives the following MIDI data. Exceptions are noted in
parentheses:
parentheses:
Channel Messages
Pitch Bend (receive only)
Velocity
Release Velocity (receive only)
Program Changes
Pitch Bend (receive only)
Velocity
Release Velocity (receive only)
Program Changes
Controller Name
MIDI Controller #
Bank Select (for QCard access)
0
Modulation
1
Volume
7
Pan (receive only)
10
Expression (receive only)
11
Sustain Pedal
64
Sostenuto Pedal
66
Soft Pedal
67
Reverb Level
91
Chorus Level
93