Yamaha PM5D-RH V2 Manual Do Utilizador

If necessary, you can make fine adjustments in steps of 
0.1 dB to the gain of the specified analog input port. Since 
the input levels of all ports are set to match each other 
when the PM5D is shipped from the factory, you will nor-
mally not need to change these settings.

To adjust the gain, click the   /   buttons located at the 
left and right of each box to specify the gain of each input 
port in 0.1 dB units. If you want to restore all input ports 
to their factory settings, click the FACTORY PRESET but-
ton. Click the OK button to apply the settings.

If necessary, you can make fine adjustments in steps of 0.01 
dB to the gain of the specified output port. The factory set-
ting is 0.00 dB.

To adjust the gain, click the   /   buttons located at the 
left and right of each box to specify the gain of each output 
port in 0.01 dB units. If you want to reset all output ports 
to 0.00 dB, click the FACTORY PRESET button. Click the 
OK button to apply the settings.