Yamaha PM5D-RH V2 Manual Do Utilizador

E TO MATRIX (only for MIX channels and 

This area shows the on/off status of the signal sent 
from the MIX channel or STEREO A/B channel to the 
MATRIX buses, and the point from which the signal is 
sent.

F TO STEREO (MIX channels only)

This area shows the pan, the send position, and the on/
off status of the signal sent from the MIX channel to 
the STEREO bus.

This screen shows the on/off status, level, and cue monitor 
status of the output channels and DCA groups.

A ON/OFF (On/off)

Here you can switch output channels on/off, and 
switch DCA group muting on/off. These settings are 
linked with the [ON] keys of the corresponding chan-
nels and the [MUTE] keys of the DCA groups.

B Level

Here you can adjust the level of the output channels 
and DCA groups. The current value is shown in the 
box immediately below. These are linked with the 
encoder or fader of the corresponding channel or DCA 
group.

C Cue

Here you can switch cue monitoring on/off for output 
channels and DCA groups. These are linked with the 
[CUE] key of the corresponding channel or DCA 
group.

6

5

1

3

2