Yamaha PM5D-RH V2 Manual Do Utilizador

D TO ST (To stereo)

If this button is on, the corresponding input channel is 
assigned to the STEREO bus. This is linked with the 
TO ST button of the CH to MIX screen (PAN/ROUT-
ING function).

E DIRECT

If this button is on, the signal of the corresponding 
input channel will be sent to the output port selected as 
the direct output. This is linked with the DIRECT OUT 
ON/OFF button in the INSERT/DIRECT OUT POINT 
screen (IN PATCH function).

F Output port

This area indicates the output port that is patched in 
the DIRECT OUT PATCH screen (INPUT PATCH 
function) to the direct output of this input channel 

G ALL STEREO

Clicking this button enables the assignment of all input 
channels to the STEREO bus.

H ALL BUS

Clicking this button enables the assignment of all input 
channels to FIXED-type MIX buses.

I ALL CLEAR

Clicking this button cancels all assignments in the FIX 
ASSIGN VIEW screen.

J SURROUND MODE

This indicates the currently selected surround mode.

Here you can make settings for LCR mode, which allows 
three-channel playback by adding a CENTER channel to 
the L/R channels of the STEREO bus.

Except for the fact that the send-sources are input chan-
nels, the display and operations are the same as in the 
MATRIX/ST function LCR screen. Refer to p.267.

8

9

J

7