Yamaha PM5D-RH V2 Manual Do Utilizador

The STEREO A/B channel strip lets you send the signal of the STEREO A/B channels to the MATRIX bus, and adjust the out-
put level of the STEREO A/B channels.

A [TO MATRIX] LED

This LED will light when the signal sent from the STE-
REO channel to the MATRIX bus is on.

B [COMP] LED

This indicates the operating status of the compressor 
for the STEREO channel. This will be dark when the 
gain reduction amount is 0 dB, dimly lit when it is 0–
10 dB, and lit when it is greater than 10 dB.

C STEREO A/B [SEL] key

This selects the STEREO A or STEREO B L/R channels 
for editing in the SELECTED CHANNEL section or 
display. The L/R channels will alternate each time you 
press the key.

D STEREO [MONO] key

This switches the STEREO B channel to monaural. The 
status will alternate between monaural and stereo each 
time you press the key.

E STEREO [ON] key

This switches the STEREO channel on/off. If this key is 
off (LED dark), no signal will be output from that STE-
REO channel.

F STEREO fader

This 100 mm fader adjusts the output level of the STE-
REO channel.

G STEREO [CUE] key

This is used to monitor the STEREO A/B channel via 
the Cue Monitor/Solo function.

7

4

6

5

3

2

1