Yamaha EMX68s Manual Do Utilizador

 

EMX88S/EMX68S Quick Guide

 

Set the MASTER control in the MAIN section to 
“

  

√

√

√

√

 

,” then while playing an instrument con-

nected to a channel to be checked (or while 
speaking to a connected microphone), adjust the 
LEVEL control of the corresponding channel so 
that the 0 LED of the peak level indicator in the 
MAIN section will light up momentarily.

 

• Do not press the PAD switch if sound is input from 

the microphone. Otherwise, press the PAD switch 
on.

• If you are using one of the speakers as a monitor 

speaker, use the MASTER control of the MONITOR 
section to adjust its volume.

• Note that if the LIMITER indicator stays lit for a 

long time, the built-in amplifier and speakers may 
be damaged.

 

1 Turn on the ON switch in the DIGITAL EFFECT 

section. The ON switch indicator lights up.

2 Using the Program selector, select one of 16 effect 

types.

3 Adjust the amount of effect applied by using the 

EFFECT control of the target channel and the 
EFFECT RTN control in the MAIN section.

 

1 Press the POWER switch of the EMX88S/EMX68S 

to turn off the power to the unit.

2 Turn off the power to all connected devices.

• Be sure to follow the power off sequence specified 

above to prevent the speakers from being dam-
aged.

• Set the MASTER controls in the MAIN section 

and the MONITOR section to “0” for use next 
time (so that a loud noise will not sound the next 
time you turn on the power to the unit).

EMX88S (EMX68S)

EMX88S (EMX68S)