Yamaha EMX68s Manual Do Utilizador

 

EMX88S/EMX68S Quick Guide

 

Connect an electric acoustic guitar or electric 
bass to the Super Hi-Z jacks. 

 

• If you wish to use a guitar signal processor or bass 

effect unit, connect them to the Hi-Z jack or LINE 
jack. You cannot use the Hi-Z jack and the Low-Z 
jack for the same channel at the same time. If a 
microphone has already been connected to the Low-
Z jack of a channel, you cannot connect the effect 
unit to the Hi-Z jack of the channel.

 

To the EMX88S/EMX68S’s LINE jacks, you can 
connect an electronic musical instrument such as 
a synthesizer, drum machine, signal processor 
connected to an electric guitar, etc. Refer to the 
diagram below to make a stereo connection from 
the output jacks (such as L/MONO and R) of an 
electronic musical instrument to the LINE jacks 
in stereo.

If you wish to connect multiple instruments, 
make a monaural connection as shown below.

 

• You can also use the Hi-Z jacks and Super Hi-Z 

jacks to connect multiple instruments. You cannot 
use the Hi-Z jack and the Low-Z jack for the same 
channel at the same time. If a microphone has 
already been connected to the Low-Z jack of a chan-
nel, you cannot connect an instrument to the Hi-Z 
jack of the channel.

 

1 Turn on the power to all external devices con-

nected to the EMX88S/EMX68S.

2 Make sure that the MASTER controls in the 

MONITOR section and the MAIN section are set 
to “0,” then press the POWER switch on the 
EMX88S/EMX68S to turn on the power.

 

• Be sure to follow the power up sequence specified 

above to prevent the speakers from being damaged.

• To correct the low range, turn on the YAMAHA 

SPEAKER PROCESSING switch in the upper right 
corner of the panel.

EMX88S (EMX68S)

Electric-acoustic

guitar

Electric

bass

EMX88S (EMX68S)

Synthesizer,
Drum machine,
Guitar processor

EMX88S (EMX68S)

EMX88S (EMX68S)