Yamaha EMX68s Manual Do Utilizador
16
Front and rear panel
EMX88S/EMX68S—Owner’s Manual
Rear panel
1
Speaker output jacks (SPEAKERS)
Connect speakers here. The EMX88S/EMX68S
has two internal power amps. There are three
ways in which speakers can be connected to the
EMX88S/EMX68S.
Connect speakers here. The EMX88S/EMX68S
has two internal power amps. There are three
ways in which speakers can be connected to the
EMX88S/EMX68S.
• Two-channel connection
• Two-channel parallel connection
• Bridge connection
At this time, use the power amp select switch
N
on the control panel to select a signal sent to the
correct jacks.
Refer to the “Connections” section on the next
page.
correct jacks.
Refer to the “Connections” section on the next
page.
2
AC IN socket
Connect the included power cord to this socket.
Connect the plug of the power cord to an AC out-
let that meets the requirements stated in the spec-
ifications in this document.
Connect the included power cord to this socket.
Connect the plug of the power cord to an AC out-
let that meets the requirements stated in the spec-
ifications in this document.
Installation
The EMX88S/EMX68S uses a forced cooling system with intake on the bottom of the rear panel and exhaust
on the top of the rear panel to avoid blocking the heated air flow.
on the top of the rear panel to avoid blocking the heated air flow.
2
1
NO
NO
Front
Front
15cm
or less
Exhaust
Intake