Yamaha EMX68s Manual Do Utilizador

 

EMX88S/EMX68S Quick Guide

 

The following steps (1–5) explain the basic con-
nection and operation of the EMX88S/EMX68S.

Also, please read “Front and Rear Panel” and 
“Basic Operation” following this Quick Guide 
section to learn more about using the EMX88S/
EMX68S.

 

Using speaker cables, connect each speaker to the 
SPEAKERS A 1 jack and to the B 1 jack in the 
SPEAKERS jack section on the rear panel of the 
EMX88S/EMX68S.

 

• The diagram above shows an example of connecting 

two main speakers. Refer to pages 17–18 for other 
connection examples.

• You may connect to either of the two jacks on the 

speakers.

• Be sure to use a cable designed for speaker connec-

tion.

 

Never connect the speakers in the manner shown 
below. Otherwise, the EMX88S/EMX68S’s built-
in power amplifier will be damaged.

 

Set the power amp select switch (located on the 
right corner on the panel) to MAIN L-R.

 

• This Quick Guide assumes that two main speakers 

are connected. Refer to pages 13, 17, 18 for other 
connections and power amp select switch settings.

• When the power amp select switch is set to the 

MAIN L-R position, the stereo L signal will be out-
put from the SPEAKERS A jacks, and the stereo R 
signal will be output from the SPEAKERS B jacks.

EMX88S (EMX68S)

EMX88S (EMX68S)

EMX88S (EMX68S)

EMX88S (EMX68S)

Power amp select switch