Woodstock W1667 Manual Do Utilizador

-11-

Figure 10. Aligning the pocket in the headstock

with the column.

Figure 11. Securing the headstock to the 

column.

With an assistant, position the pocket over
the column and allow the headstock to
slide down until the column fully seats up
and into the headstock (approximately 2").
See 

Align the headstock directly over the foot
of the base as viewed from the front of the
drill press.

Tighten the two setscrews to secure the
headstock to the column. See 

The headstock must be tightened in position

with the setscrew so the headstock is aligned

with the drill press base for balance and

weight distribution. 

DO NOT over tighten the

set screw and strip the threads or bend the

column.