Milan Technology T1E1-CF-01(LH) Manual Do Utilizador

T1E1-CF-01 IN THE NETWORK

NOTE: THE T1E1-CF-01 REQUIRES A CSU BETWEEN THE MEDIA
CONVERTER AND THE PUBLIC TELEPHONE NETWORK.

Features

•

Media converter is framing independent (as ESF vs D4) and supports
all common line codes, (AMI, B8ZS, HDB3).

•

Distance extensions of 2 km 850 nm multimode or 8 km 1300 nm
singlemode.

•

Jitter attenuators optimize Bit Error Rate (BER) performance.

•

Dry relay contacts allow media converter to be tied into separate
alarm circuit

•

All Ones Insertion (AIS), indicated by LEDs, on loss of signal at
copper and/or fiber interface.

TECHNICAL SPECIFICATIONS

Standards

Emissions: CISPR A

T1/E1 Physical Layer: ITU-T, ANSI, AT&T, ETSI

Case Dimensions

4.75" x 3.0" x 2.0"

(119mm x 76mm x 50mm)

Shipping Weight

3 pounds

(1.4 kilograms)

Delay

400nsec round trip

Environment

Temperature:

0-50°C (32° to 122° F )

Humidity

10-90%, non condensing

Altitude

0-10,000 feet

Power Supply Requirements Replace power supply with only the equivalent
input rating (see below) and output rating (unregulated 9 VDC).

TN PN

Requirement

Location

3507

240 volts, 50 hertz

United Kingdom

3342

230 volts, 50 hertz

Europe

3340

120 volts, 60 hertz

USA/Canada/Mexico

3346

100 volts, 50-60 hertz

Japan

3511

240 volts, 50 hertz

Australia

3537

(with power cord: 3522) South Africa

NOTE: This product also can be powered by the Transition Networks E-MCR
series media converter rack.

Warranty

Lifetime

DECLARATION OF CONFORMITY

Name of Mfg:

Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA

Model:

T1E1-CF-01 Series Copper-to-Fiber Media Converter

Part Number:

T1E1-CF-01, T1E1-CF-01(SC), T1E1-CF-01(SM),
T1E1-CF-01(LH)

Regulation:

EMC Directive 89/336/EEC

Purpose: To declare that the T1E1-CF-01 and T1E1-CF-01(SM) to which this

declaration refers is in conformity with the following standards.

EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;
EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950

I, the undersigned, hereby declare that the equipment specified above conforms to the

above Directive(s) and Standard(s).

_June 8, 1999_____

Stephen Anderson, Vice-President of Engineering

Date

UTP/STP

Fiber

CSU

To Telco

T1 OR E1

Network Extension

To Telco

T1 or E1