Tektronix TDS460A Manual Do Utilizador
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–49
When extended-acquisition-length mode is on, this command can still set and
return values. However, the oscilloscope will treat all modes, except Peak Detect,
as the Sample mode.
return values. However, the oscilloscope will treat all modes, except Peak Detect,
as the Sample mode.
Acquisition
ACQuire:NUMAVg, ACQuire:NUMENv, CURVe?, DATa:WIDth
For the TDS 400A, 510A, 500C & 700C:
ACQuire:MODe { SAMple | PEAKdetect | HIRes | AVErage |
ENVelope }
For the TDS 600B:
ACQuire:MODe { SAMple | PEAKdetect | AVErage | ENVelope }
For all TDS:
ACQuire:MODe?
For the TDS 400A, 510A, 500C, & 700C:
ENVelope
HIRes
ACQuire
:
MODe
<Space>
AVErage
PEAKdetect
SAMple
?
For the TDS 600B:
ENVelope
AVErage
ACQuire
:
MODe
<Space>
?
PEAKdetect
SAMple
SAMple specifies that the displayed data point value is simply the first sampled
value that was taken during the acquisition interval. In sample mode, all
waveform data has 8 bits of precision. You can request 16 bit data with a
value that was taken during the acquisition interval. In sample mode, all
waveform data has 8 bits of precision. You can request 16 bit data with a
Group
Related Commands
Syntax
Arguments