• AC 40 - 225 Amps
• DC 40 - 210 Amps
• 100% Duty Cycle on All Settings
• Output Selector with 6 Ranges
• Output Control for Fine Current Adjustment
• Use with a broad range of AC & DC Electrodes

Including Fleetweld

DC SEMIAUTOMATIC WIRE FEED WELDING
(Constant Voltage)

• CV Tap Setting for 60-200 Amps.
• 100% Duty Cycle.
• Excellent Performance with .068” (1.7mm)

-211-MP Innershield

Electrode.

• Limited MIG Welding with L-50 & L-56 using blended

Argon Shielding Gas.

• The Recommended Wire Feeder is the LN-25, but

Can Also be Used with the LN-7 Wire Feeder.
(LN-7 and LN-25 without Contactor Requires the
K240 Contactor Kit).

AC/DC TIG WELDING (Constant Current)

• AC & DC TIG Welding Can be Done at All Constant

Current Output Range Settings.

AUXILIARY POWER

• 8000 Watt AC 115/230 Volt 60 Hz. Generator.
• Operates AC Power Tools.
• Powers Battery Chargers.
• Powers a 1.5 HP Motor (If Started Under No Load).
• Lights Eighty 100 Watt Incandescent Bulbs.
• Can be Used for Standby Power.

OTHER FEATURES

• Bottom Mounted 9 Gallon Fuel Tank with a

Convenient Top Fill and Fuel Gauge.

• Polarity Switch for Selecting DC+, DC-, or AC

Welding Output.

• K930-1 TIG Module Available.

• Remote Control Receptacle Kit Available.

• Electronic Engine Idler. Engine Automatically Goes to

Low Idle in 10 to 14 Seconds after Welding or Use

of Auxiliary Power. Includes High Idle Switch.

• Electric Starting.

• Battery Charging Ammeter.

• Full 8 KVA Auxiliary Output Receptacle.

• Factory Installed Engine Hour Meter.

• Engine Protection Shuts Engine Down in the

Event of Low Oil Pressure.

• Built-in Feet for Easy Mounting to Truck Bed or

Trailer.

• All Copper Alternator Windings and High

Quality Insulation for Long-Life and
Dependability.

• Powder Painted Case and Base for Outstanding

Corrosion Protection.

• Quiet muffler with reversible exhaust feature; either

right or left side of machine.

ENGINE OPTIONS

Three Engines are available for the Ranger 8 Welders;
the Onan P220, the Kohler 20 HP Command

* and the

Honda GX620KI. All three engines have the following
features:

• Air Cooled, Twin-Cylinder.
• Cast Aluminum Alloy Crankcase with Integral Cast

Iron Cylinder Liners.

• Electric Start with Solid State Battery Charging

Module.

• Solid State Breakerless Ignition.
• Spin on Oil Filter.
• Low Oil Pressure Shutdown Protection.
• Overhead Valves & Hydraulic Valve Lifters.

These trademarks are the property of their respec-

tive manufacturers.