Lexmark 5000 Series Manual Do Utilizador

If your camera does not allow you to change the paper size setting, use the control panel to change the paper
size to 4 x 6 in. (10 x 15 cm).

Insert the USB cable that came with your camera to the camera, and insert the other end into the PictBridge
port on the front of the printer.

Turn the camera on and choose your first photo using the camera control panel.

Wait for PictBridge Printing to appear on the display of the printer control panel.

Note: If Paper/Photo Size Error appears, press 

 to clear the error message.

Press 

.

Press 

 or 

 repeatedly until Photo Size appears.

Press  .

Press 

 or 

 repeatedly until 4 x 6 in. or 10 x 15 cm appears.

Press  .

Press 

 or 

 repeatedly until Paper Setup appears.

Press  .

Press 

 or 

 repeatedly until Paper Size appears.

Press  .

Press 

 or 

 repeatedly until 10 x 15 cm appears.

Press  .

Press Start Color or Start Black.

These are possible solutions. Try one or more of the following:

Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.

Disconnect the camera.

Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.

Use only the USB cable that came with the camera.

If an error message appears on the display, see “Error messages” on page 163.

These are possible solutions. Try one or more of the following:

Troubleshooting