Lexmark 5000 Series Manual Do Utilizador

If you are copying or scanning from a magazine or a newspaper, see “Removing wavy patterns from scanned photos,
magazines, or newspapers” on page 159.

Make sure the document is loaded facedown in the Automatic Document Feeder (ADF) and centered between the
ADF paper guides.

Unplug the power cord and the phone line from the wall.

Open the control panel.

Push the roller lever gently to the left, pull it forward, and then lift the white roller out of the printer.

Use a clean, lint-free cloth dampened with water to wipe the white roller and the scan lens.

Note: The scan lens is located under the white roller.

Reinstall the dry white roller, push the roller lever gently to the left, and then snap it into place.

Reconnect the power cord and the phone line.

These are possible solutions. Try one or more of the following:

Make sure the document or photo is loaded facedown in the Automatic Document Feeder (ADF) and centered
between the ADF paper guides.

Make sure the paper size being used matches the size you selected.

Make sure that the Original Size setting is Automatic or the size of the original document that you are copying.

These are possible solutions. Try one or more of the following:

If an error message is displayed, see “Error messages” on page 163.

If the 

 light is not on, see “Power button is not lit” on page 128.

Troubleshooting