KYOCERA FS-3800N Manual Do Utilizador

11

Make sure that the paper tray is lowered and stopped. Then,

while watching the side plates inside the feeder, rotate the

paper adjuster knob on top of the feeder clockwise. Stop

rotating the knob when the side plates have been set to their

widest settings (outmost positions). See figure below.

Place several sheets of the paper you are going to use with the

feeder on the center of the paper tray.

Adjust the side plates by rotating the adjuster knob on top of

the feeder counterclockwise so that the left and right side edges

of the paper are flush with the left and right side plates.

Then, rotate the adjuster knob half a turn clockwise. This

allows an approximately 1 mm gap between each side of the

paper stack and the side plate, which is needed to ensure the

proper paper feeding. See figure below.

pf8-Eng.pm6

12/19/00, 8:22 PM

11