Brother MFC-9650 Manual Do Utilizador

C H A P T E R   T W E L V E

If you are using Windows

®

 95, after you connect Brother machine to

Computer. you may see “New Hardware Found Brother MFCXXXX”
during startup.

You can select “Do not install a driver (Windows

®

 will not prompt you

again).” and click OK, so Windows

®

 will not display this dialog box

again
—OR—
If you see “Update Device Driver Wizard”, Click Next to bypass the
Windows

®

 Plug and Play Printer Driver screens, followed by Finish.

If you are using Windows

®

 98, you may see the “Add New Hardware

Wizard” during startup, follow the instructions from the installer, then
click Next. Click Finish when it appears on the screen.

A small filter core and cable tie are enclosed in the vinyl bag with your
machine. PLEASE SAVE THESE PARTS. You will need them in the
future if you connect your machine with a Personal Computer. And for
optimal preformance, use the Double Shielded Parallel Interface Cable
with enclosed Filter core and Cable tie.

When you use a Personal Computer with your machine, please attach the
enclosed Filter core to Double Shielded Parallel I/f Cable.

Attach the Cable tie 50mm or less from Parallel Interface connector.