Fujitsu SPARC64 V Manual Do Utilizador
120
SPARC JPS1 Implementation Supplement: Fujitsu SPARC64 V • Release 1.0, 1 July 2002
ASI 4F
16
(
ASI_SCRATCH_REGx
)
SPARC64 V provides eight of 64-bit registers that can be used temporary storage for
supervisor software.
supervisor software.
Block Load and Store ASIs
ASIs E0
16
and E1
16
exist only for use with
STDFA
instructions as Block Store with
Commit operations (see Block Load and Store Instructions (VIS I) on page 47). Neither
ASI E0
ASI E0
16
nor ASI E1
16
should be used with
LDDFA
; however, if either is used, the
LDDFA
behaves as follows:
1. No exception is generated based on the destination register rd (impl. dep. #255).
2. For
LDDFA
with ASI E0
16
or E1
1
and a memory address aligned on a 2
n
-byte
boundary, a SPARC64 V processor behaves as follows (impl. dep. #256):
n
≥
3 (
≥
8-byte alignment): no exception related to memory address alignment is
generated, but a
data_access_exception
is generated (see case 3, below).
n = 2 (4-byte alignment):
LDDF_mem_address_not_aligned
exception is generated.
n
≤
1 (
≤
2-byte alignment):
mem_address_not_aligned
exception is generated.
3. If the memory address is correctly aligned, a
data_access_exception
with an
AFSR.FTYPE
= “invalid ASI” is generated.
Partial Store ASIs
ASIs C0
16
–C5
16
and C8
16
–CD
16
exist for use with the
STDFA
instruction for Partial
Store operations (see Partial Store (VIS I) on page 57). None of these ASIs should be
used with
used with
LDDFA
; however, if one of them is used, the
LDDFA
behaves as follows on
a SPARC64 V processor (impl. dep. #257):
1. For
LDDFA
with C0
16
–C5
16
or C8
16
–CD
16
and a memory address aligned on a 2
n
-
byte boundary, a SPARC64 V processor behaves as follows:
n
≥
3 (
≥
8-byte alignment): no exception related to memory address alignment is
generated.
[1]
Register Name:
ASI_SCRATCH_REG
x (x = 0–7)
[2]
ASI:
4F
16
[3]
VA:
VA<5:3> = register number
The other VA bits must be zero.
The other VA bits must be zero.
[4]
RW:
Supervisor read/write
Data<63:0>