APC AP7900 Manual Do Utilizador
®
USER’S GUIDE
Switched Rack PDU
74
Boot mode setting.
This setting selects which method will be used to
define the Rack PDU’s TCP/IP settings whenever the Rack PDU turns on,
resets, or restarts:
resets, or restarts:
•
Manual
: Three settings (
System IP
,
Subnet Mask
, and
Default
Gateway
), which are available only when
Manual
is used to define the
needed TCP/IP settings.
•
BOOTP only
: A BOOTP server provides the TCP/IP settings.
•
DHCP only
: A DHCP server provides the TCP/IP settings.
•
DHCP & BOOTP
: The Rack PDU will attempt to get its TCP/IP settings
from a BOOTP server first, and then, if it cannot discover a BOOTP
server, from a DHCP server.
server, from a DHCP server.
Advanced settings.
The boot mode affects which settings are available:
• Two settings are available for all
Boot mode
selections to define the
Rack PDU’s
Host Name
and
Domain Name
values.
–
Host Name:
When an Administrator configures a host name here
and a domain name in the
Domain Name
field, users can then enter
a host name in any field in the Switched Rack PDU interface (except
e-mail addresses) that accepts a domain name as input.
e-mail addresses) that accepts a domain name as input.
–
Domain Name:
An Administrator needs to configures the domain
name here only. In all other fields in the Switched Rack PDU
interface (except e-mail addresses) that accept domain names, the
interface (except e-mail addresses) that accept domain names, the
An
After IP Assignment
setting, by default, will switch
Boot
mode
from its default
DHCP & BOOTP
setting to
BOOTP only
or
DHCP only
, depending on the type of server that supplied the
TCP/IP settings to the Rack PDU.
For information about the
After IP Assignment
setting, and other
settings that affect how the Rack PDU uses BOOTP and DHCP,
see
see
.