IBM 61Y Manual Do Utilizador
Installing options
61
∼2∼ Bottom
tabs
1.
Release the three tabs on the right side of the front trim bezel and release the two
tabs on the left side of the bezel.
tabs on the left side of the bezel.
2.
Gently separate the bezel partly from the server.
3.
Release the two bottom tabs on the bezel and lift the bezel away from the server.
Working with adapters
You can install up to six PCI adapters in the expansion connectors on the processor
board. All six of the slots are peripheral component interconnect (PCI) expansion
slots.
board. All six of the slots are peripheral component interconnect (PCI) expansion
slots.
The server comes with an integrated super video graphics array (SVGA) video
controller, which is not removable. If you want to disable this controller and use a
video adapter instead, you can install a video adapter in an expansion slot. When you
install a PCI video adapter, the server BIOS automatically disables the integrated
video controller.
controller, which is not removable. If you want to disable this controller and use a
video adapter instead, you can install a video adapter in an expansion slot. When you
install a PCI video adapter, the server BIOS automatically disables the integrated
video controller.
Note:
Video adapters are supported in all six PCI slots.
The following illustration shows the location of the 64-bit PCI expansion slots on the
processor board.
processor board.
Note:
The illustrations in this book might differ slightly from your hardware.
Adapter considerations
Before you continue with the adapter-installation procedure:
Non-hot-plug PCI slots
1-2 (on PCI bus A)
Hot-plug PCI slots
3-6 (on PCI bus B)
3-6 (on PCI bus B)
External Attention LEDs for
hot-plug slots
Internal Attention LEDs for
hot-plug slots
Power LEDs
for hot-plug slots