Samsung BN68-01416A-00 Manual Do Utilizador

− 

To keep your product up-to-date with new digital television 

features then software upgrades are periodically broadcast 

as part of the normal television signal. It will automatically 

detect these signals and display the software upgrade 

banner. You are given the option to install the upgrade.



Press the 

ENTER button, then the current software 

version is shown. To display the software version 

information, press the 

ENTER button again.



Press the 

ENTER button to search for new software from the currently broadcasting channels.



Standby Mode Upgrade : On / Off 

Press the 

ENTER button. To continue software upgrade with master power on, Select On by 

pressing the ▲ or ▼ button.  

45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since 

the power of the unit is turned on internally, the screen may be on slightly for the PDP product. 

This phenomenon may continue for more than 1 hour until the software upgrade is completed.

− 

You can reset the values stored to the factory default values.

➢

  The Reset operation deletes all channel information 

and user preferences returning all values to their default 

factory state.



Press the 

ENTER button with Reset selected.  

The 

Enter PIN is displayed.



Enter your current 4-digit PIN code by using the 

numeric buttons (0~9). The warning message is 

displayed. All values will be reset by pressing the 

coloured buttons (red, green, yellow, and blue) in turn.

➢

  The default PIN of a new TV set is “0-0-0-0”.

➢

  When PIN is changed in Child Lock, the PIN for 

resetting automatically changes.



When reset is complete, it operates DTV Plug & Play 

(DTV Auto Store, Time Zone-depending on the country, 

Time Setting) and exits from the digital TV mode without changing to the analog TV mode. 

(Refer to page 10)







BN68-01416A-Eng.indb   41

2008-2-29   17:20:46