Samsung BN68-01416A-00 Manual Do Utilizador

The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1  Press the MENU button to display the menu. 

Press the ▲ or ▼ button to select 

Input, then press the 

ENTER button.

  Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then 

press the 

ENTER button.

  Press the ▲ or ▼ button to select Setup, then press the 

ENTER button.

4  Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then 

press the 

ENTER button.

5  Press the ▲ or ▼ button to select On, then press the ENTER 

button.

➢

The Anynet+ (HDMI-CEC) function is enabled.

➢

If you select 

Off, Anynet+ (HDMI-CEC) is disabled.

➢

When the Anynet+ (HDMI-CEC) function is disabled, all the 

Anynet+ related operations are deactivated.

4  Press the ▲ or ▼ button to select Auto Turn Off, then press 

the 

ENTER button.

5  Press the ▲ or ▼ button to select Yes, then press the  

ENTER button.

➢

The Auto Turn Off function is enabled.

➢

If you select 

No, the Auto Turn Off function is canceled.

Press the 

EXIT button to exit.

➢

The Select Device setting of the TV remote control is to be set 

to TV to use the Anynet+ function.

➢

If you set 

Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned 

off. However, if the device is recording, it may not be turned off.

1  Press the MENU button to display the menu. 

Press the ▲ or ▼ button to select 

Input, then press the 

ENTER button.

  Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then 

press the 

ENTER button.

  Press the ▲ or ▼ button to select Select Device, then press 

the 

ENTER button.

4  Press the ▲ or ▼ button to select to a particular device and 

press the 

ENTER button. 

It is switched to the selected device.

5  If you cannot find a device you want, press the ▲ or ▼ button 

to select 

Searching Connections, then press the ENTER 

button.

 

The meassage 

Configuring Anynet+ connection... is 

displayed. When searching devices completes, the connected 

devices are listed in the Anynet+ menu.

➢

Switching to the selected devices may take up to 2 minutes. 

You cannot cancel the operation during the switching 

operation.

➢

The time required to scan for devices is determined by the 

number of connected devices.

➢

When the device scan is complete, the number of found devices is not displayed.

➢

Although the TV automatically scans devices when it is turned on using the 

POWER button, devices 

connected when the TV is on or under a specific circumstance are not displayed in the device list. 

Therefore select 

Searching Connections menu to search devices.

➢

If you have selected external input mode by pressing the 

SOURCE button, you cannot use the 

Anynet+ function. Make sure to switch to an Anynet+ device by using the 

TOOLS button.

Continued...































BN68-01416A-Eng.indb   43

2008-2-29   17:20:48