Samsung BN68-01416A-00 Manual Do Utilizador

1  Press the MENU button to display the menu. 

Press the ▲ or ▼ button to select 

Input, then press the ENTER button.

  Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER 

button.

  Press the ▲ or ▼ button to select Receiver, then press the ENTER button.

4  Press the ◄ or ► button to select to On, then press the ENTER button. 

Now you can listen to sound through the receiver.

5  Press the EXIT button to exit. 

➢

 When the receiver is set to On, you can listen to the TV sound through the 2-channel 

receiver.

➢

 If the receiver is exclusively for a home theater only (supporting audio only), it may 

not appear in the device list.

➢

 Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.

➢

 In case of a content with copyright problems, listening through the receiver may not properly operate.

■  Check if the device is an Anynet+ device. The Anynet+ system 

supports Anynet+ devices only.

■  Connect only one receiver.

■  Check if the Anynet+ device power cord is properly connected.

■  Check the Anynet+ device’s Video/Audio/HDMI cable connections.

■  Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ 

setup menu.

■  Check whether the TV remote control is in TV mode.

■  Check whether it is Anynet+ exclusive remote control.

■  Anynet+ doesn’t work at a certain condition. (Searching channels)

■  When connecting or removing the HDMI cable, please make sure 

to search devices again or restart your TV.

■  Check if the Anynet+ Function of Anynet+ device is set on.

■  Check if the Anynet+ device is properly connected to the TV and 

check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ 

Setup menu.

■  Press the 

TV button on the TV remote control to switch to TV. 

Then press the 

TOOLS button to show the Anynet+ menu and 

select a menu you want.

■  Select 

View TV in Anynet+ menu. 

■  Press the 

SOURCE button on the TV remote control and select a 

device other than Anynet+ devices.

■  Press any of 

P, CH LIST, and PRE-CH to change to the  

TV mode. (Note that the channel button operates only when a 

tuner-embedded Anynet+ device is not connected.)

■  You cannot use the remote control when you are configuring 

Anynet+ or switching to a view mode.

■  Use the remote control when the Anynet+ setting or switching to 

view mode is complete.

■  You cannot use the play function when Plug & Play is in progress.

■  Check whether or not the device supports Anynet+ functions. 

■  Check whether or not the HDMI cable is properly connected.

■  Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ 

setup menu.

■  Search Anynet+ devices again.

■  You can connect an Anynet+ device using the HDMI cable only. 

Some HDMI cables may not support Anynet+ functions.

■  Check whether the antenna jack on the recording device is 

properly connected.

■  Connect the optical cable between TV and the receiver.













BN68-01416A-Eng.indb   45

2008-2-29   17:20:50