Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-427
DID-BD (Direct Inward Dial Trunk Circuit Pack)
10
DID-BD (Direct Inward Dial Trunk
Circuit Pack)
Circuit Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also DID-TRK (DID Trunk) Maintenance
documentation for related trunk information.
circuit pack level errors. See also DID-TRK (DID Trunk) Maintenance
documentation for related trunk information.
1.
Where P is the port network number (1 for PPN and 2 or; C is the carrier designation
(for example, A, B, C, D, or E); and SS is the address of the slot in the carrier where
the circuit pack is located (for example, 01, 02, ..., etc.).
(for example, A, B, C, D, or E); and SS is the address of the slot in the carrier where
the circuit pack is located (for example, 01, 02, ..., etc.).
MO Name As
It Appears in
Alarm Log
Alarm
Level
Initial System
Technician
Command to Run
1
Full Name of MO
DID-BD
MIN
test board PCSS sh
Direct Inward Dial
Trunk Circuit Pack
Trunk Circuit Pack
DID-BD
WRN
test board PCSS sh
Direct Inward Dial
Trunk Circuit Pack
Trunk Circuit Pack