Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-285

release link 

 Link not administered or not enabled

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

 ’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message is displayed:

 Command resources busy; Press CANCEL to clear, and then 

resubmit

If all of the available maintenance resources are currently in use, then the 
following message is displayed:

 All maintenance resources busy; try again later

For the following output example, assume that the command that was entered is 
"release link 1."

None.

Port

The port address (cabinet-carrier-slot-circuit) of the maintenance 
object that is being busied out or released. With this command 
the Port address represents the link-id.

Maintenance Name

The type of maintenance object that is being released.

Alt. Name

Not applicable.

Result

"PASS," "ABORT," "FAIL."

Error Code

A system-generated number that tells why the release failed or 
aborted. A detailed list of the codes can be found in the 
"Busyout/Release Commands" section of this chapter.

 
 release link 1

                         COMMAND RESULTS

 Port   Maintenance Name  Alt. Name  Result  Error Code
 01C0301    PI-LINK                  PASS

 Command successfully completed