Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-357
set tdm
8
Output
The following message indicates that the command completed successfully:
Command successfully completed
The following message indicates that the command was unsuccessful, due to
synchronization not being disabled:
synchronization not being disabled:
Must disable synchronization-switch first
The following message indicates that the command was unsuccessful, due to the
board not being inserted:
board not being inserted:
Board not inserted
The following message indicates that the command was unsuccessful, due to an
invalid board being specified (not a DS1 trunk or tone/clock):
invalid board being specified (not a DS1 trunk or tone/clock):
Port/Board invalid
The following message indicates that the command was unsuccessful, due to
reasons other than the ones listed above:
reasons other than the ones listed above:
Error encountered, can’t complete request
Feature Interactions
None.
set tdm
This command will set which TDM bus has the control channel and dedicated
tones on it.
tones on it.
Synopsis
set tdm port-network pn number bus bus
override
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
set tdm port-network 2 bus a
set tdm port-network 2 bus b override
set tdm port-network 2 bus b override