Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-359

set tdm 

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy; 

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

The following message indicates that the command completed successfully:

Command successfully completed

The following message indicates that the command was unsuccessful, due to the 
tdm bus being busied out:

Must release tdm bus first

The following message indicates that the command was unsuccessful, due to the 
health of the tdm bus:

Tdm bus is out-of-service; use ’override’ 

option to force ’set’ command

The following message indicates that the command was unsuccessful, due to the 
dedicated tone time slots being used:

Dedicated tone time slots in use; use ’override’

option to force ’set’ command

The following message indicates that the command was unsuccessful, due to a 
tone/clock (TN768) board not being available:

Cannot set tdm bus or tone/clock boards; 

need a TN768 board

The following message indicates that the command was unsuccessful, due to the 
expansion port network (EPN) not being available:

EPN is not available

The following message indicates that the command was unsuccessful, due to the 
link to the expansion port network (EPN) not being available: