Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-362

set time 

If the system technician presses 

HELP 

after entering "set time," the following 

message will be displayed:

Entry is not required

If the system encounters an error in getting the current time of day, then the 
following message will be displayed:

Error encountered, cannot complete request

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy; 

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

After entering the command "set time," the system technician will be presented 
with the following form. The current time, or default time will be placed in the 
fields.

Day of the Week:

The day of the week that will be used by the time of day clock on the 
switch. Valid entries are Monday through Sunday. The timer will 
maintain the value of the day of the week, incrementing it every 
twenty-four (24) hours, and resetting it at the seventh day.

Day of the Month:

The day of the month that will be used by the system time of day 
clock. 1-31 are valid entries. A check for leap year is also made, 
February can have 29 days in 1984, but only 28 in the year 1990.

Month:

The month that will be used by the system time of day clock. Any of 
the twelve months are valid entries.