Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-651
test shadow-link
8
Synopsis
test shadow-link
[ short | long ][ repeat number | clear ] schedule
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
test shadow-link l
test shadow-link sh r 2
test shadow-link sh r 2 schedule
test shadow-link c
test shadow-link sh r 2
test shadow-link sh r 2 schedule
test shadow-link c
Description
The test shadow-link command performs hardware diagnostics for the shadow
link between the two duplication-interface circuit packs. This command works
only with a High or Critical Reliability System. Refer to
link between the two duplication-interface circuit packs. This command works
only with a High or Critical Reliability System. Refer to
for more details.
Defaults
The default for the command is short with the repeat of 1.
Parameters
short
The short and long test sequence both execute only test #318.
long
The short and long test sequence both execute only test #318.