Lucent Technologies R5SI Manual Do Utilizador

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-10

AC-POWER

Error Log Entries and Test to Clear Values

Refer to the appropriate test description and follow the recommended
procedures.

AC Power Query Test (#78)

Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence.

Table 10-3.

AC Power Error Log Entries

Error
Type

Aux

Data

Associated Test

Alarm

Level

On/Off

Board

Test to Clear Value

Any

test environment P sh r 1

513

Any

AC Power Query
Test (#78)

WARNING

OFF

test environment P sh r 1

Table 10-4.

TEST #78 AC Power Query Test

Error
Code

Test

Result

Description / Recommendation

1000

ABORT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals a maximum of 5 times.

2000

ABORT

Response to the test request was not received within the allowable time
period.

1. Retry the command at 1-minute intervals a maximum of 5 times.

2. If the test continues to ABORT with Error Code 2000, check for system

powering problems with the A carrier (PPN or EPN). Resolve all
DC-POWER alarms. Then, repeat the test.

3. If the test continues to ABORT with a 2000 Error Code, resolve all

DUPINT (Duplication Interface) errors in a high or critical reliability
system PPN, PR-MAINT (Maintenance/Tape Processor) errors in a
standard PPN, or MAINT (EPN Maintenance circuit pack) errors in an
EPN. Repeat the test.

2029

ABORT

Internal system error

1. Retry the command at 1-minute intervals a maximum of 5 times.

Continued on next page